Next you line up the film with the camera hole and place it down carefully. The camera hole is the easiest way to line up the film, you don't want it to go on crooked. 
Carefully smooth the film out and start pressing the sides down. The sides should be easy to stick.
Once the sides on stuck nicely, and everything is lined up, give it a couple minutes to set. After that use the squeegee to remove the bubbles.
Now we gotta do the corners, these are the hardest part but just be patient and it wont be that difficult. Make sure the film is fully stretched out over the corners, then hold it firmly in places for about 2 mintues. After that it it starts to come off slightly, just leave it. Do the rest of the corners. Now let the iPhone sit and rest overnight, in the morning you will have a nicely protected phone. If the corners are still up slightly, press them down now and they will stick.
Installing InvisibleShield the second time on the iPhone only took me maybe 15 minutes. The first time took me 45. You don't get a practice film with it so be careful and patient. Just take your time and you will be fine. This is probably the best case you are going to find for you iPhone. Nothing else compares. This is a must for all iPhone owners in Canada.
See my other post on the InvisibleShield here:
http://www.iphoneuser.ca/2008/03/my-case-invisibleshield.html
0 comments:
Post a Comment